This PVC seal is designed and manufactured for the UPRACKS roof rack.
It is supplied in running meters. Due to its wide contact area, it is perfect to close the upper channel of the roof rack. The seal can also be installed to improve the appearance or, for example, ...
The set consists of two L-shaped brackets that are attached to the lower
part of the Upracks platform. The folded UPRACKS table runs on the provided rails and is blocked by two brakes.
This table with a load capacity of over 80 kg is made entirely of aluminum
(honeycomb structure at the top). The table surface consists of a stainless steel foil that is easy to clean. When folded, it is only 3,4 cm thick. The weight is only 10 kg. Size: 145 x 75.5x 70c...
The aluminium plates can be attached to the C-channels of the Upracks platform
to create a step or seat.
Angle profiles made of cast aluminum, which block the load at the side or can
also be used as a self-supporting bracket. Can be used in any position and equipped with the appropriate square nuts and bolts. Page size 4.3 cm, thickness 4,3 cm.
Angle profiles made of cast aluminum, which block the load at the side or can
also be used as a self-supporting bracket. Can be used in any position and equipped with the appropriate square nuts and bolts. Page size 8,7 cm, thickness 4,3 cm.
Self-supporting bracket. Can be used in any position and equipped with the
appropriate square nuts and bolts. Page size 8,7 cm, thickness 8,7 cm.
UPRACK aluminium box, 782x385x190mm 45 l, sealed,
Exklusiv für UPRACKS gebaut, weist diese Aluminiumkiste einige besondere Eigenschaften auf: Blechdicke 1,2 mm Deckeldichtung aus Gummi Innenversiegelung zum Schutz des Inhalts gegen Witterungseinf...
Upracks rear ladder for Land Rover Defender (models up to 2016). The ladder
is delivered without instructions and assembly material.
Upracks rear ladder for Land Rover Defender (models up to 2016) with
extendable extension piece. The extension is locked to the rear ladder with a bolt and split pin and can easily be pulled out. The ladder is delivered without instructions and assembly material.
All Upracks rail kits and corners are supplied with a sufficient number of
rail legs for attachment. If necessary, the leg can also be bought in pairs (item no.: 63-ASRFITS2), e.g. to increase stability again or to increase the rail upwards. All UpRacks railings and corne...
All Upracks rail kits and corners are supplied with a sufficient number of
rail legs for attachment. If necessary, the leg can also be bought in pairs (item no.: 63-ASRFITS2), e.g. to increase stability again or to increase the rail upwards. All UpRacks railings and corne...
All Upracks rail kits and corners are supplied with a sufficient number of
rail legs for attachment. If necessary, the leg can also be bought in pairs (item no.: 63-ASRFITS2), e.g. to increase stability again or to increase the rail upwards. All UpRacks railings and corne...
UPRACK SIDE RAIL 3 WAYS ALU, POLISHED
All UpRacks railings and corners are supplied with a number of rail legs sufficient for fastening. If required, the feet can also be purchased in pairs (Art. No.: 63-ASRFITS2), e.g. to further incr...
All Upracks rail kits and corners are supplied with a sufficient number of
rail legs for attachment. If necessary, the leg can also be bought in pairs (item no.: 63-ASRFITS2), e.g. to increase stability again or to increase the rail upwards. All UpRacks railings and corne...
UPRACKS FRONT/REAR 56cm,black for 1287mm wide racks,
All UpRacks railings and corners are supplied with a number of rail legs sufficient for fastening. If required, the feet can also be purchased in pairs (Art. No.: 63-ASRFITS2), e.g. to further incr...
All Upracks rail kits and corners are supplied with a sufficient number of
rail legs for attachment. If necessary, the leg can also be bought in pairs (item no.: 63-ASRFITS2), e.g. to increase stability again or to increase the rail upwards. All UpRacks railings and corne...
The set consists of two C-shaped parts and the corresponding screw. It is
mainly used as a carrier and connector for the rail, but can also serve as a load securing device or accessory holder. Made of stainless steel.
S' shaped brackets which are required to mount the rail on the Upracks platform.
In addition to their function as a carrier for the rail, they can also be used as an element for securing loads. Made of steel with a black powder coating.
All Upracks rail kits and corners are supplied with a sufficient number of
rail legs for attachment. If necessary, the leg can also be bought in pairs (item no.: 63-ASRFITS2), e.g. to increase stability again or to increase the rail upwards. All UpRacks railings and corne...
RECOMMENDED PRODUCTS ON THESE ITEMS